Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Kunaphil

Pages: [1] 2 3 ... 10
Projects / Re: PCB photoresist film exposure
« on: August 18, 2017, 12:19:12 PM »
My recipe turns green.  It seems to get stronger each time you use it.

Projects / Re: PCB photoresist film exposure
« on: August 17, 2017, 11:07:53 AM »
I use the same recipe as Thoth.  It works pretty good, but make sure to have plenty of ventilation.

General Discussion / Re: K40Whisperer
« on: August 09, 2017, 02:27:37 PM »
It wouldn't have worked on mine, my board was "NewlyDraw" which was supposed to be an improvement over Moshi  :-\

The reason I replaced my board was one of the drivers went out and it was cheaper to replace with an L6 ($12) vs. the replacement K40 board ($120) but if the Cohesion board had of been available I may have gone that "easier" route ($99).

This looks really interesting for the newer systems though, it probably means I could add native support in T2Laser.
.  I would love to see T2 software to run a Cohesion board!

T2 Software Updates / Re: Updates
« on: June 13, 2017, 06:03:24 PM »
I finally got my pc running.  Can you help me out with getting T2 running again?



T2 Software Updates / Re: Updates
« on: June 08, 2017, 06:49:00 PM »

I lost my pc today.  It died.  What do I need to do to get my software back after I get a new pc?

I am really impressed with all the work you have done Ralph.  I truly believe that Bencut and T2 are heads and shoulders the best laser software available.  The marriage of a smoothie and your software is a great match. 

Just wondering how the battle is going...

Smoothie controller board / Re: Smoothie board 12VDC wiring
« on: May 31, 2017, 01:09:21 PM »
It's pretty cool! ;D

You guys are tremendous!

General Discussion / Re: 40watt Co2 laser rebuild
« on: May 29, 2017, 11:45:51 AM »
What size?

The board is a good price considering it's a drop in replacement, I wonder if the Eleks guys would be willing to make one similar to Mana SE. That could be $25-30 and only needs the connectors changed. I guess a simple converter cable would work, maybe I should make that for $10 and sell with T2Laser license for converting the K40 lasers.

The Cohesion Smoothieboard already has the ribbon cable connector built in. 
They beat you to the punch! ::)

General Discussion / Re: 40watt Co2 laser rebuild
« on: May 29, 2017, 08:42:25 AM »
Anyone know the correct size of replacement mirrors for the K40?  And who is a good source?


Ralph is currently testing a smoothieboard.  I just purchased a smoothieboard and it is working on my k40.  I am using laserweb3 software.  I have tried it with T2 and Benbox.....kinda sorta works but..not.  :'(  I am having similar issues and will be trying to get my mirrors realigned today.  I am a total nube when it comes to k40 lasers. I am eagerly waiting for Zax and Ralph on the software side.


General Discussion / Re: Cohesion 3D mini for K40 (OPEN)
« on: May 28, 2017, 05:00:34 PM »
I was able to flash the sdcard with the newer firmware and also have been able to get laserweb 3 running!  I'm running some test burns.  It looks very encouraging.

General Discussion / Re: Cohesion 3D mini for K40 (OPEN)
« on: May 28, 2017, 02:32:27 PM »
just got it up!  Worked like a champ!

Pages: [1] 2 3 ... 10