Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Romoshka

Pages: [1] 2
T2 Software Updates / Re: Update rejected by Norton
« on: July 21, 2018, 05:49:42 AM »
Ok, thank you.  The other problem is con port.  That box was empty and it had been on com3.  Typing that In the com box didn't work.  The pull down didn't have any options either.  So I know this isn't a software issue but how do I determine the correct com port.  I tried every thing from 1 to 6 but nothing.  Not sure if this helps but when T2 is running both x and Y motors don't usually I can easily sled things but not now.

T2 Software Updates / Update rejected by Norton
« on: July 20, 2018, 07:51:38 PM »
Opened T2 and got a notice that an update was abailable.  Selected that but Norton rejected it and deleted the download.   As luck would have it my son, the software engineer, was visiting.  He clicked on a few more options and informed me that Norton was rejecting it because it contained the Heuristic virus.  Please advise.

T2 Engraving / arc text
« on: July 09, 2018, 12:54:03 PM »
I can not figure out how to arc text around the bottom of the circle on the outside. 
Ive got it draped over the top but cant seem to get it around the bottom

T2 Engraving / Re: How to zero out the machine
« on: July 01, 2018, 02:11:05 PM »
Got it - thank you.

T2 Engraving / How to zero out the machine
« on: July 01, 2018, 11:45:21 AM »
Green noob here.  Attempting to burn a grid and Trying to re zero X and Y after manually moving the laser to the desired point but can't figure it out.  And even if, by some technique that I stumbled on but can't repeat, I do get X and Y at 0.0 when I run it the X motor moves to the stop and that terrible click,click, click.  I guess my question is how to zero out to 0.0 after positioning the laser manually.

T2 Software Updates / Re: update failed, now wont connect
« on: June 30, 2018, 07:42:43 AM »
fixed.  thank you

T2 Software Updates / update failed, now wont connect
« on: June 30, 2018, 07:32:11 AM »
Upon opening T2 this AM was notified of an update.  Proceeded to get it but when Norton issued a cautionary note I inadvertently hit the Remove option instead of the Proceed option.  Not only did that abort the update but it removed the program all together.  Ive reuploaded it but now it wont connect.  Im still a baby here so need a bit of assistance.

Assembly Help / Re: Stepper motor plugs
« on: June 26, 2018, 12:36:36 PM »
Ah, now I understand,  Thank you.  I do orthopaedic surgery for a living but live at the "poets and lovers" level in electronics but I intend to get up to a more functional level.

Assembly Help / Re: Stepper motor plugs
« on: June 25, 2018, 05:09:34 PM »
I'm totally lost and have no idea what you are describing unless you are providing that service you use in your tag line.

Assembly Help / Re: Stepper motor plugs
« on: June 25, 2018, 12:09:33 PM »
28BYJ-48 is available in 5 or 12V.  I got the 12V version.  Its also a bipolar motor and so modification of the board in the motor is required and I've done that mod.  Just now have to figure out how to plug it into a Y axis motor.

Assembly Help / Stepper motor plugs
« on: June 25, 2018, 09:10:14 AM »
Building the rotary device (thing #2348308 on thingiverse) for my A5 and acquired the motor (28BYJ-48) but the plug is slightly wider and the indicator tabs are different, hence it won't plug in to the motor.  Where can I find a plug that fits the stepper motor?

Assembly Help / Re: Fan addition the A5
« on: June 13, 2018, 07:33:22 PM »
Awesome!  Thank you so much.  Ordered

Assembly Help / Re: Fan addition the A5
« on: June 12, 2018, 07:32:52 PM »
Rather than add a permanent connection of my fan to my laser I'd like to find a male and female connector with pigtails.  The JST that I find only has male connectors that solder to a perfect board.  Are there not male connectors with pig tails?

Assembly Help / Re: Pull down resistor on mana SE board
« on: June 12, 2018, 07:17:36 PM »
Thanks to all for all the help.  Pull down resistor soldering place with the help of some loupes...boY is that a small space. 

T2 Engraving / Reverse/mirror image text printing
« on: June 04, 2018, 08:33:11 PM »
Newbie here. After reading various reviews I decided to go with T2 and didn't bother with the limited trial, I just bought it.  Seems like small investment after what I'd paid for the A5 laser.  Watched and did the steps on the "So I've loaded T2, now what."  After getting my circle to be a circle I tried some simplementation text but it printed in correct in the mirror.  I didn't go past that as I was concerned with stabilizing wires.  Where do I go next to solve this?

Pages: [1] 2