Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - whitb38

Pages: [1]
1
T2 Engraving / Re: Position
« on: December 14, 2019, 07:50:27 PM »
Ok so i did the set home and then used the trace option to pinpoint where it would engrave. That worked perfect on images and unfilled text. When i fill the text and set home, then use trace its tracing out my whole burn grid. How do i get just the area its engraving for the filled text?

2
T2 Engraving / Re: Position
« on: December 14, 2019, 07:34:17 PM »
Thanks so much, yall are life savers!!!  :D :D :D

3
T2 Engraving / Position
« on: December 07, 2019, 08:58:14 PM »
Is there a video or thread somewhere to help me figure out how to engrave exactly where i need it to on my material? I can not figure this out for the life of me. Im using an eleksmaker A3 pro with t2 software. Any help would be much appreciated.

4
General Discussion / Re: Image
« on: July 24, 2019, 07:30:09 PM »
I've taken it apart to return. I'm going to order the Eleks A3 Pro and hopefully I'll have better luck. Thanks for the help though!

5
General Discussion / Re: Universal engraver 3000mW cnc
« on: July 24, 2019, 06:49:46 PM »
Yes all that works right.

6
General Discussion / Re: Universal engraver 3000mW cnc
« on: July 24, 2019, 12:46:11 AM »
No nothing  :-\

7
General Discussion / Re: Universal engraver 3000mW cnc
« on: July 23, 2019, 01:41:56 PM »
None are labeled

8
General Discussion / Re: Image
« on: July 23, 2019, 12:14:09 PM »
All jog arrows go the right directions, i changed the axis just to see if it would make a difference but it still engraves mirrored.   :(

9
General Discussion / Re: Universal engraver 3000mW cnc
« on: July 23, 2019, 12:10:56 PM »
4 wires from the laser to the box then 2 wires from the box to the control panel.
Im using T2laser with firmware 1.1e default

10
General Discussion / Re: Universal engraver 3000mW cnc
« on: July 23, 2019, 07:04:41 AM »
I received the benbox style. I've had nothing but trouble out of it. The laser even came on by itself and burned 4 holes before i could get it unplugged.

12
General Discussion / Universal engraver 3000mW cnc
« on: July 22, 2019, 10:50:15 PM »
Has anyone else purchased this particular laser engraver? I'm beginning to think i bought a piece of crap  :(

13
General Discussion / Re: Image
« on: July 22, 2019, 10:12:42 PM »
I tried that, it didn't fix it. The images and text are all mirror images. If i hold the engraved piece in the mirror it looks right.

14
General Discussion / Re: Image
« on: July 21, 2019, 08:05:07 PM »
Thank you!
T2Laser v1.5s
Leather and wood
When the image comes up on my screen before i engrave it, it looks normal, but when it engraves the image is flipped vertical, so letters come out backwards. I can go in and edit the pic vertically and it changes it backwards on the screen but right when it engraves. Just wondering if i have to change it every time.

15
General Discussion / Image
« on: July 21, 2019, 07:25:43 PM »
Im new to laser engraving so I'm sure I'll have more questions later..... is there a setting to change and keep the image the way its suppose to look instead of backwards every time?

Pages: [1]