Author Topic: Installation Media  (Read 444 times)

RobotEyes

  • Newbie
  • *
  • Posts: 34
    • View Profile
    • RobotLaser
Installation Media
« on: November 28, 2016, 05:15:25 AM »

Many people asked me what is the best support for RobotLaser;

Normally a USB stick is the simplest choice.
Easy to move and compatible with all PCs.

The size can also be very small (RobotLaser takes 4-5 Mb at the moment, certainly less than 10Mb in the future)

Many people use the key also to keep images and drawings.
You can use a 2 - 4 GB stick that is very cheap, and can contain lots of drawings.
If you plan to use very complex drawings you may also use a larger one,
but remember that with a 0.2 mm resolution a 100x150 mm engraver requires a 500 x 750 pixel image
that (in grayscale) occupies about 1-2 Mb.
It makes no sense to use images with much higher resolution (you can, of course, but the result does not improve)

The important thing is that the key is reliable,
if it breaks, the license dies with the stick.
While if it gets corrupted, it's not a problem you can ever reformat and reinstall in the same stick with the same license.

Carlo

Camera

  • Newbie
  • *
  • Posts: 16
    • View Profile
Re: Installation Media
« Reply #1 on: December 03, 2016, 02:21:03 PM »
Okay I tried.

I deleted/uninstall RobotLaser (licenced to 31/01/2017) from my desktop.
I downloaded your zip file again (hopefully a fresh start).
Unzipped RobotLaser onto my USB stick.
Run RobotLaser as administrator.
First came up STARTTING and I picked English.
Then an error message: -2147221502: License invalid.
I clicked OK. It said Licensing problem... Terminating! Noe License invalide. -- --

How to make it work? :(

RobotEyes

  • Newbie
  • *
  • Posts: 34
    • View Profile
    • RobotLaser
Re: Installation Media
« Reply #2 on: December 04, 2016, 03:53:03 AM »

If in your PC you have a license installed,
launching the program from a different disc, the system believes there is a hacking attempt.

1) Ask for a uninstall password by email
2) Uninstall the existing license with the LicenseKiller program (from RobotLaser site),
using the password i sent by email on request.

2) Run RobotLaser from USB disk and generates a new activation key

3) Email the key and the license to version 0.5 will be sent.
-------
In January versions 0.9 (Beta Free) and 1.0 (Full optional) will be released
and will need to generate a new key.
But I will send to all the instructions when necessary.
-------------------

Carlo

Camera

  • Newbie
  • *
  • Posts: 16
    • View Profile
Re: Installation Media
« Reply #3 on: December 05, 2016, 01:49:30 PM »
Hi, I have sent you pm but no reply so I copied the message here:

Have downloaded your LicenseKiller program from Accessories of your page.

Run it and got the following error message:

Unhandled exception has occurred in your application.  If you click Continue, the applicatin will ignore this error and attempt to continue.  If you click Quit, the application will close immediately.

Could not load file or assembly 'ActiveLock37,Version=3.7.0.1, Culture=neutral. PublicKey Token=null' or one of its dependencies.  The system cannot find the file specified.

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.IO.FileNotFoundException: Could not load file or assembly 'ActiveLock37, Version=3.7.0.1, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
File name: 'ActiveLock37, Version=3.7.0.1, Culture=neutral, PublicKeyToken=null'
   at LicenseKiller.frmMain.frmMain_Load(Object sender, EventArgs e)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Windows.Forms.Form.OnLoad(EventArgs e)
   at System.Windows.Forms.Form.OnCreateControl()
   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
   at System.Windows.Forms.Control.CreateControl()
   at System.Windows.Forms.Control.WmShowWindow(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   at System.Windows.Forms.Form.WmShowWindow(Message& m)
   at System.Windows.Forms.Form.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].



************** Loaded Assemblies **************
mscorlib
    Assembly Version: 4.0.0.0
    Win32 Version: 4.6.1586.0 built by: NETFXREL2
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
----------------------------------------
LicenseKiller
    Assembly Version: 0.5.1.3
    Win32 Version: 0.5.1.3
    CodeBase: file:///D:/Temp/LicenseKiller.exe
----------------------------------------
Microsoft.VisualBasic
    Assembly Version: 10.0.0.0
    Win32 Version: 14.6.1586.0 built by: NETFXREL2
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System
    Assembly Version: 4.0.0.0
    Win32 Version: 4.6.1586.0 built by: NETFXREL2
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Core
    Assembly Version: 4.0.0.0
    Win32 Version: 4.6.1586.0 built by: NETFXREL2
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
System.Windows.Forms
    Assembly Version: 4.0.0.0
    Win32 Version: 4.6.1586.0 built by: NETFXREL2
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
    Assembly Version: 4.0.0.0
    Win32 Version: 4.6.1586.0 built by: NETFXREL2
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Runtime.Remoting
    Assembly Version: 4.0.0.0
    Win32 Version: 4.6.1586.0 built by: NETFXREL2
    CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Remoting/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

Click continue, another window with the Red words Killing License appear and do nothing.

RobotEyes

  • Newbie
  • *
  • Posts: 34
    • View Profile
    • RobotLaser
Re: Installation Media
« Reply #4 on: December 06, 2016, 03:46:31 AM »
The program LicenseKiller MUST BE placed in the same directory of RobotLaser.