Author Topic: Finally! grbl 0.9j and grbl 1.1e for laseraxe board  (Read 467 times)

PhiMX

  • Newbie
  • *
  • Posts: 3
    • View Profile
Finally! grbl 0.9j and grbl 1.1e for laseraxe board
« on: March 12, 2017, 06:08:03 AM »
Hi, are you aware that someone changed the pin mappings in grbl and made a fork for 0.9 and 1.1 grbl that works with our boards?
I just happened to fall into the same trap that many of you did when flashing the damn thing and as a way out I started to change grbl pin mappings to fit the controller.
Because thatīs all that there is.. just a tiny bit of different pin mapping on the laseraxe board.
While researching the pin mappings I found out that user 1wise already did the work and made a fork of grbl. I flashed it and it works.

grbl 1.1e for laseraxe board:
https://github.com/1wise/grblv1.1-laseraxe

grbl 0.9j for laseraxe board:
https://github.com/1wise/grbl-laseraxe-arduino-nanov3

enjoy!

and donīt forget to comment and tell me how it does!

iakovl

  • Newbie
  • *
  • Posts: 20
    • View Profile
Re: Finally! grbl 0.9j and grbl 1.1e for laseraxe board
« Reply #1 on: April 21, 2017, 04:18:59 AM »
can you take a picture of your board, just to make sure it's the same board i have (didn't have time to play with my AXE for a while)