Author Topic: laser on when connect  (Read 1953 times)

Nosferatu

  • Newbie
  • *
  • Posts: 11
    • View Profile
Re: laser on when connect
« Reply #15 on: April 20, 2017, 09:10:51 AM »
The 1k SMD resistor soldered on the laser did solved my problem :)

Thanks
Nos!
-- EleksMaker A5 - 2500mW with T2-Laser (Laserweb3/ bCNC)

DeVere

  • Newbie
  • *
  • Posts: 2
  • I am John am I
    • View Profile
Re: laser on when connect
« Reply #16 on: May 24, 2017, 02:22:24 PM »
I managed to get this done today.
The first resistor within range I came across was a 1.5K (SMD).
Yes, works great... one of the few occasions where it goes well the first time.

I thought I'd post a photo.
For the curious, that blob is hot glue to immobilize the microscopic solder joint.


I also got the home switches installed today, also worked on the first attempt.
I was going to post the photos, but when I looked at them, they turned out to be the worst photos of anything I have ever taken in my life, so I'll get back to that later.
Buried in poor quality, 98% brand new, undocumented imports.
Slowly burning my way out with a goodbangbest 15Watt LASER.