Author Topic: ELEKS A5 Pro Build Inspiration  (Read 272 times)

LaserJack

  • Guest
ELEKS A5 Pro Build Inspiration
« on: August 09, 2017, 10:46:49 AM »
Howdy Folks,
I just finished building the ELEKS Laser A5 Pro with three upgrades. I ordered extra accessories from the ELEKS Store to add some eye candy to my gantry, the blue washers, the blue 2.5W laser module. Then I headed to the hardware store to pickup LEDs and a engraving/cutting mesh screen. Finally, I found a video where it was shown how to add small plastic or metal protectors under the end belt tighteners, under the retaining screw so that the screw does not cut a hole in the gantry belts.  Go here: https://youtu.be/iIC6kJAlZQ8
My next and last tasks will be to put the Air Assist from pawpawpaw on my rig, and put it all in a portable carry case.
Here it is: the Swiss version  8)

nottingham82

  • Hero Member
  • *****
  • Posts: 1530
    • View Profile
Re: ELEKS A5 Pro Build Inspiration
« Reply #1 on: August 09, 2017, 09:12:30 PM »
thats alot of bling!  Its like the swiss army knife and the swiss guard all rolled into one!
Laser: 2500mw A5 eleks maker
OS: Windows 10 all in one pc
Software: T2
http://www.gearbest.com/3d-printers-3d-printer-kits/pp_290386.html Paid $160 in 2016

Administrator

  • Administrator
  • Hero Member
  • *****
  • Posts: 2615
  • Administrator
    • View Profile
Re: ELEKS A5 Pro Build Inspiration
« Reply #2 on: August 09, 2017, 09:51:33 PM »
Absolutely beautiful...!!!
Admin -- Ralph -- support @ BenCutLaser dot us
https://www.dropbox.com/s/dat6mz87hlq4cfc/SetupBenCutLaser2.8a.zip?dl=0
BCL Paid license: $49.95
via Paypal to bclpp@primemail.com

InvisibleRasta

  • Newbie
  • *
  • Posts: 44
    • View Profile
Re: ELEKS A5 Pro Build Inspiration
« Reply #3 on: August 11, 2017, 05:47:39 AM »
awesome..looks super nice. i want one xD

ThothLoki

  • Hero Member
  • *****
  • Posts: 1780
  • Tinkerer
    • View Profile
Re: ELEKS A5 Pro Build Inspiration
« Reply #4 on: August 11, 2017, 05:49:30 AM »
Where's the material you are supposed to be cutting on it? ;D

Looks great
Laser: A5 2000mw with L7 Board / A3 2500mw PWM with Mana SE -- All using T2Laser
3D Printer: Monoprice Maker Select v2.1
Image Resizer Applications (All OS): http://benboxlaser.us/index.php/topic,1434.msg17297.html#msg17297

LaserJack

  • Guest
LaserJack - ELEKS A5 Pro Build Inspiration
« Reply #5 on: August 12, 2017, 01:28:58 PM »
Where is the material you ask?
Here are a first few images. Cutting a Kumiko design out of ply and polyester felt.
Another image is a name sign for a door.

My next step is to install a guide frame fastened to the mesh so that material can always be placed exactly in the same location. Image will follow.  ;D

ThothLoki

  • Hero Member
  • *****
  • Posts: 1780
  • Tinkerer
    • View Profile
Re: ELEKS A5 Pro Build Inspiration
« Reply #6 on: August 12, 2017, 02:12:15 PM »
beautiful work!
Laser: A5 2000mw with L7 Board / A3 2500mw PWM with Mana SE -- All using T2Laser
3D Printer: Monoprice Maker Select v2.1
Image Resizer Applications (All OS): http://benboxlaser.us/index.php/topic,1434.msg17297.html#msg17297

laser_cutter

  • Sr. Member
  • ****
  • Posts: 339
    • View Profile
Re: LaserJack - ELEKS A5 Pro Build Inspiration
« Reply #7 on: August 12, 2017, 02:53:51 PM »
Where is the material you ask?
Here are a first few images. Cutting a Kumiko design out of ply and polyester felt.
Another image is a name sign for a door.

My next step is to install a guide frame fastened to the mesh so that material can always be placed exactly in the same location. Image will follow.  ;D

What software are you using? Looks like there might be some alignment issues OR resolution.Very nice peices though.

Zax

  • T2Laser
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 5234
    • View Profile
    • T2Laser
Re: ELEKS A5 Pro Build Inspiration
« Reply #8 on: August 12, 2017, 03:45:53 PM »
It looks like he's enabled Photo Mode, either that or he has some backlash issues.

Reminder: Photo Mode should NEVER be manually enabled, the algorithm will determine when it is required to soften the image.

LaserJack

  • Guest
Re: ELEKS A5 Pro Build Inspiration
« Reply #9 on: August 12, 2017, 03:59:10 PM »
Thanks Mr. Zax. I will check that. Hoping to become a Master T2er.