Author Topic: License problem (RESOLVED)  (Read 492 times)

boinghu

  • Newbie
  • *
  • Posts: 14
    • View Profile
License problem (RESOLVED)
« on: January 09, 2018, 12:22:37 PM »
Hi Ralph !
About a month ago I wrote an email asking how pre-registration code depends.
Hardware or installed programs.
I did not get answer.
Today I sent 2 emails again but I just got an automatic message.

I thought it was like the Italian Profili program.
If I do not change the hardware, the code remains.
So I paid for the license, thinking that if I re-install Window, I will not lose it.
 
Since I always format the system HDD before reinstalling  to remove  unwanted trash, I have also installed BCL again.
And I see the code completely different.
In other words, in vain the same computer , the license is not valid.
 
Do I have to buy the license again at full cost?
 
Have a nice day
Imre
« Last Edit: January 11, 2018, 01:18:31 PM by Administrator »

Administrator

  • Administrator
  • Hero Member
  • *****
  • Posts: 2742
  • Administrator
    • View Profile
Re: License problem
« Reply #1 on: January 09, 2018, 01:59:46 PM »
This forum is the best place to reach me. Sorry your emails didn't get to me but that was by design. I could not answer all the emails that I was getting. Most questions could be answered in my Trouble shooting section.

The BenCutLaser.lic file is nothing more than a file containing the serial number of your hard drive. Then that is encrypted so it can be decrypted by BCL and read and compared to the serial number that is fetched in real time when BCL starts up.

Reformatting a hard drive may change this serial number. In that case your .lic file will no longer work. You can get a new .lic file at 50% of the price of BCL.

However, if you wrote down your ID Code of your old drive, there are utilities that will allow you to change your serial number so you can set it back to what it was before and BCL will work again.
« Last Edit: January 09, 2018, 02:01:06 PM by Administrator »
Admin -- Ralph -- support @ BenCutLaser dot us
https://www.dropbox.com/s/qv1qee2vb65785t/SetupBenCutLaser3.2a.zip?dl=0
BCL Paid license: $49.95
via Paypal to bclpp@primemail.com

boinghu

  • Newbie
  • *
  • Posts: 14
    • View Profile
Re: License problem (OPEN)
« Reply #2 on: January 09, 2018, 02:27:20 PM »
Payment sent.

Thank you

boinghu

  • Newbie
  • *
  • Posts: 14
    • View Profile
Re: License problem (OPEN)
« Reply #3 on: January 10, 2018, 10:04:17 AM »
Hi Ralph !

Yesterday I sent the license fee but I did not get anything.

Administrator

  • Administrator
  • Hero Member
  • *****
  • Posts: 2742
  • Administrator
    • View Profile
Re: License problem (OPEN)
« Reply #4 on: January 10, 2018, 10:24:43 AM »
PM me with your email address and ID Code.
Admin -- Ralph -- support @ BenCutLaser dot us
https://www.dropbox.com/s/qv1qee2vb65785t/SetupBenCutLaser3.2a.zip?dl=0
BCL Paid license: $49.95
via Paypal to bclpp@primemail.com

boinghu

  • Newbie
  • *
  • Posts: 14
    • View Profile
Re: License problem (OPEN)
« Reply #5 on: January 11, 2018, 12:40:15 PM »

szecsike@t-online.hu

the code  B8A98873

Administrator

  • Administrator
  • Hero Member
  • *****
  • Posts: 2742
  • Administrator
    • View Profile
Re: License problem (OPEN)
« Reply #6 on: January 11, 2018, 01:18:16 PM »
szecsike@t-online.hu

the code  B8A98873

Paid license file sent.

Thank you.
Admin -- Ralph -- support @ BenCutLaser dot us
https://www.dropbox.com/s/qv1qee2vb65785t/SetupBenCutLaser3.2a.zip?dl=0
BCL Paid license: $49.95
via Paypal to bclpp@primemail.com