Author Topic: Z axis buttons almost cut off in v1.5h laser control window  (Read 735 times)

kered

  • Jr. Member
  • **
  • Posts: 59
    • View Profile
    • Laracha-Meteo
As title says really, in the laser control window enlarging or maximising the window does not make them fully visible. If I'm careful I can just get them to click on. I'll put up a screenshot from my other pc. I have just installed the Z axis and mana control board.

Windows 10 home x32, V1803
« Last Edit: June 17, 2018, 12:41:57 PM by kered »
Eleksmaker A3 Pro with Z axis.
Heavily Modded Anet A8 with Octoprint and Raspberry pi.

Zax

  • T2Laser
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 6792
    • View Profile
    • T2Laser
Re: Z axis buttons almost cut off in v1.5h laser control window
« Reply #1 on: June 17, 2018, 02:56:03 PM »
That's not how it looks on my Windows 7 or 10 systems. I will do some testing but in general the display is handled by .net so I am not sure how this would happen.

Update: Click on Help / Diagnostics / Display System DPI and let me know what values you are using, I just tested at 100, 120 and 140. In all cases it's perfectly aligned as it should be.
« Last Edit: June 17, 2018, 03:02:06 PM by Zax »

kered

  • Jr. Member
  • **
  • Posts: 59
    • View Profile
    • Laracha-Meteo
Re: Z axis buttons almost cut off in v1.5h laser control window
« Reply #2 on: June 18, 2018, 02:15:18 AM »
Hi Zax, DPI gives me 106 on both x and y. whatever that means

cheers
Derek
Eleksmaker A3 Pro with Z axis.
Heavily Modded Anet A8 with Octoprint and Raspberry pi.

kered

  • Jr. Member
  • **
  • Posts: 59
    • View Profile
    • Laracha-Meteo
Re: Z axis buttons almost cut off in v1.5h laser control window
« Reply #3 on: June 18, 2018, 02:34:32 AM »
Hi Zax, I think I have fixed it, Because this is a small screen in the display settings, scale and layout I had changed to 125% as my eyes are not what they were. I changed back to 100% and it cleared it up and looks fine. I then put back to 125% to try to repeat the fault and windows asked if I wanted to switch on "Fix apps so they are not blurry " Before it was off, by switching it on it fixes the problem, its in the Advanced scaling settings.
So now its fixed and I still have my 125%.
thanks for pointing me in the right direction.
cheers
Derek

edit, dpi now on 96 both x and y
« Last Edit: June 18, 2018, 02:36:21 AM by kered »
Eleksmaker A3 Pro with Z axis.
Heavily Modded Anet A8 with Octoprint and Raspberry pi.

Zax

  • T2Laser
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 6792
    • View Profile
    • T2Laser
Re: Z axis buttons almost cut off in v1.5h laser control window
« Reply #4 on: June 18, 2018, 04:17:45 AM »
OK, it must have been a Microsoft "glitch" as I tested on 3 different systems (2 laptops and my desktop) will different resolutions and DPI settings - they all looked the same so I was confused  ???

Thanks for the feedback. I'm working on an update so pretty busy trying to get it finished.

kered

  • Jr. Member
  • **
  • Posts: 59
    • View Profile
    • Laracha-Meteo
Re: Z axis buttons almost cut off in v1.5h laser control window
« Reply #5 on: June 18, 2018, 04:21:27 AM »
Thank you for your quick replies as usual, anything I can do to help in return just drop me a line.
cheers
Derek
Eleksmaker A3 Pro with Z axis.
Heavily Modded Anet A8 with Octoprint and Raspberry pi.