Author Topic: BCL Hangs in certain conditions (CLOSED)  (Read 293 times)

Maarten65

  • Newbie
  • *
  • Posts: 43
    • View Profile
BCL Hangs in certain conditions (CLOSED)
« on: February 04, 2020, 04:13:42 AM »
I noticed BCL (ver 3.2)  hangs in certain conditions.
go to tab 'Laser Tool Parameters', press button 'left/right test'. This executes the movement of the laser with the correct power. After the movement ends and laser turned off BCL keeps showing the timer as the mouse icon. And then BCL hangs, I need to use program manager to stop the process. I can replay this issue.

A similar behavior appeared earlier while I was playing around in BCL. I cannot remember when this happend and I concluded I did something wrong. But during the last 24 hours, it happened several  times so I became more focused when it happens. I will report other situations as well when I can pinpoint the moments more precise.

info:
Software:
BCL Version 3.2
windows 10 home, version 10.0.18362 build 18362

Hardware
Eleksmaker Mana SE V3.2
nano flashed to 1.1e (see startup info below)
   ( BenCutLaser (c) 2016-2018 All Rights Reserved )
   ( Developed by Ralph Freshour and Paul Henty )
   ( support@BenCutLaser.us )
   ( Connected to COM3 @ 115200 baud ) 
   Grbl 1.1e ['$' for help]

Best regards,
Maarten
« Last Edit: March 03, 2020, 07:46:09 AM by Administrator »
T2 Laser v1.5y / GRBL  1.1e / Eleksmaker Mana V5.2 / windows 10 home, version 10.0.18362
Autodesk Inventor 2020 / Autocad 2020

Administrator

  • Administrator
  • Hero Member
  • *****
  • Posts: 2847
  • Administrator
    • View Profile
Re: BCL Hangs in certain conditions
« Reply #1 on: February 04, 2020, 05:35:27 AM »
I'll have a look at this.
Admin -- Ralph -- support @ BenCutLaser dot us
https://www.dropbox.com/s/qv1qee2vb65785t/SetupBenCutLaser3.2a.zip?dl=0
BCL Paid license: $49.95
via Paypal to bclpp@primemail.com

Administrator

  • Administrator
  • Hero Member
  • *****
  • Posts: 2847
  • Administrator
    • View Profile
Re: BCL Hangs in certain conditions (OPEN)
« Reply #2 on: February 14, 2020, 05:36:13 AM »
I cannot reproduce this problem using 3.2a.
Admin -- Ralph -- support @ BenCutLaser dot us
https://www.dropbox.com/s/qv1qee2vb65785t/SetupBenCutLaser3.2a.zip?dl=0
BCL Paid license: $49.95
via Paypal to bclpp@primemail.com