Author Topic: Assembly Reference Video  (Read 2874 times)

Administrator

  • Administrator
  • Hero Member
  • *****
  • Posts: 2752
  • Administrator
    • View Profile
Assembly Reference Video
« on: April 04, 2016, 01:44:55 PM »
This assembly video may be of help to some of you:

https://www.youtube.com/watch?v=2KNJRJkFnUU

Thanks to @carolynsdad for this reference!
« Last Edit: April 04, 2016, 01:49:09 PM by Administrator »
Admin -- Ralph -- support @ BenCutLaser dot us
https://www.dropbox.com/s/qv1qee2vb65785t/SetupBenCutLaser3.2a.zip?dl=0
BCL Paid license: $49.95
via Paypal to bclpp@primemail.com

eodguy

  • Newbie
  • *
  • Posts: 43
    • View Profile
Re: Assembly Reference Video
« Reply #1 on: April 04, 2016, 02:18:13 PM »
I used these as a reference when I set mine up. Video 2 does over the boards and drivers. These are the best I have seen on youtube so far. 

ROSS

  • Hero Member
  • *****
  • Posts: 777
    • View Profile
Re: Assembly Reference Video
« Reply #2 on: April 05, 2016, 02:59:23 AM »
Deffo bonus points for carolynsdad for finding those videos.
Downloaded in the vault!

.
Lasers are wonderful machines..not ONLY  can they cut a finger off BUT  they can also cauterise it at the same time.....

SAFETY -  IS NO ACCIDENT

caperry88

  • Full Member
  • ***
  • Posts: 192
    • View Profile
Re: Assembly Reference Video
« Reply #3 on: April 05, 2016, 03:42:54 AM »
Very Informative, nice find.
Equipment:  Gearbest 2500mw A5 Mini Laser Engraving Machine  -  2500MW  SILVER 167912906 Air-cooling Weak Light Automatic Positioning DIY Kit
Software: T2Laser with J-Tech Photonics 0.9g Grbl

ROSS

  • Hero Member
  • *****
  • Posts: 777
    • View Profile
Re: Assembly Reference Video
« Reply #4 on: April 08, 2016, 06:35:11 AM »
Here's another  (music is rubbish tho!)

https://www.youtube.com/watch?v=MwHQ6JnlmXo&nohtml5=False
.
Lasers are wonderful machines..not ONLY  can they cut a finger off BUT  they can also cauterise it at the same time.....

SAFETY -  IS NO ACCIDENT

Eojuk

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Assembly Reference Video
« Reply #5 on: January 07, 2017, 02:54:41 PM »
Hi
I found this one, it's not in English but it's a good how to
https://m.youtube.com/watch?v=Q0K2aK_9P6o
Joe