Author Topic: buying 65x50 3000mw off ebay questions  (Read 1738 times)

CNCit

  • Jr. Member
  • **
  • Posts: 99
  • CNC it and they will come!
    • View Profile
Re: buying 65x50 3000mw off ebay questions
« Reply #15 on: October 07, 2016, 11:43:31 AM »
http://benboxlaser.us/index.php/topic,20.msg132.html#msg132

ok found your post ................

The one opposite the Nano is the X, the other is for the 2 Y motor's.

Vref / 0.8 = Imax, so the X motor is current limited at 0.5A and it runs smooth with no excessive heat buildup. It could go higher but there's no point.

The Y motors are limited to less current each but with 2 of them to share the load everything works well.

-Zax.
Is this where I put my cool witty signature?
Im not selling anything here!

Lob0426

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1492
  • Let the Magic Blue Smoke out!
    • View Profile
    • Richards RasPi Web Server
Re: buying 65x50 3000mw off ebay questions
« Reply #16 on: October 07, 2016, 12:55:53 PM »
That is mounted upside down compared to our machines. So your X is lower left. The next two to the right are your Y.
Richard
A5 2.5W w/homing switches on L7
A5 2W diode self upgraded from stock 500mw

Experimenting with Mega2560 board upgrade

CNCit

  • Jr. Member
  • **
  • Posts: 99
  • CNC it and they will come!
    • View Profile
Re: buying 65x50 3000mw off ebay questions
« Reply #17 on: October 07, 2016, 04:05:25 PM »
That is mounted upside down compared to our machines. So your X is lower left. The next two to the right are your Y.


it was just temporarily mounted,
Is this where I put my cool witty signature?
Im not selling anything here!

Lob0426

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1492
  • Let the Magic Blue Smoke out!
    • View Profile
    • Richards RasPi Web Server
Re: buying 65x50 3000mw off ebay questions
« Reply #18 on: October 07, 2016, 04:35:48 PM »
It will work either way. But your electrons will be upside down! LOL
Richard
A5 2.5W w/homing switches on L7
A5 2W diode self upgraded from stock 500mw

Experimenting with Mega2560 board upgrade

CNCit

  • Jr. Member
  • **
  • Posts: 99
  • CNC it and they will come!
    • View Profile
Re: buying 65x50 3000mw off ebay questions
« Reply #19 on: October 07, 2016, 06:24:57 PM »
It will work either way. But your electrons will be upside down! LOL
ugh upside down electrons!   lol
Is this where I put my cool witty signature?
Im not selling anything here!