Benbox Laser Machines/CO2 Lasers/3D Printers

Software => T2 Engraving => Topic started by: Wheelz on April 13, 2019, 10:46:12 PM

Title: Home Position Keeps Moving
Post by: Wheelz on April 13, 2019, 10:46:12 PM
If I'm burning multiple parts, or if I interrupt a run, my home position is altered by X:11.4 Y:5.3 every time.
I have to move it back and Set Home Position again. If I forget to, obviously, I get double image cut.
Why won't it hold my home position?
Title: Re: Home Position Keeps Moving
Post by: Zax on April 14, 2019, 05:14:37 AM
Have you accidentally saved an offset?

If so, click "Clear Grbl Positions" in the Machine menu.
Title: Re: Home Position Keeps Moving
Post by: Wheelz on April 15, 2019, 11:36:44 PM
Certainly not deliberately, but I guess I must have somehow.
"Clear Grbl Positions" fixed it anyway.
Thanks Zax.

BTW. If I reinstall T2 to restore it to original settings, will that affect my registration?
It's just that I've done too much tinkering with settings to see what they do and some processes aren't behaving as I'd like any more and I don't know what I've done, lol.  :-[
Title: Re: Home Position Keeps Moving
Post by: Zax on April 16, 2019, 06:01:04 AM
If you use Machine Home and don't have home switches it will create a fixed offset, so every time you home that offset is applied.

No it won't but there's no need to reinstall, you can restore defaults in the Help menu.

It only affects T2Laser settings, to reset your laser use the Reset Grbl Parameters option in the Machine menu.