Author Topic: lost step?  (Read 1238 times)

Hokuro

  • Jr. Member
  • **
  • Posts: 88
    • View Profile
lost step?
« on: May 07, 2019, 12:59:09 PM »
hi,
i have a strange problem:
I burned the samurai (700x950 0.2res) and it came perfect.
I resampled at 1400x1900 and burned at 0.1res and missed steps.
I burned other things, perfect.
I still burned the samurai (too dark but that's not the problem) and missed the steps again.
every time the line is skipped all the drawing moves to the right.
I didn't stop the work, it stopped by itself, with  laser on.
other prints later are good.
why does this image cause me problems?

here the image: https://photos.app.goo.gl/ZgjujV4wsqvvbN1F8
« Last Edit: May 07, 2019, 01:05:21 PM by Hokuro »
my english is very bad, please be patient. :)

Zax

  • T2Laser
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 7304
    • View Profile
    • T2Laser
Re: lost step?
« Reply #1 on: May 07, 2019, 02:00:16 PM »
If the settings are the same your machine doesn't care what it is engraving, it moves at a constant feed rate back and forth.

Hokuro

  • Jr. Member
  • **
  • Posts: 88
    • View Profile
Re: lost step?
« Reply #2 on: May 07, 2019, 03:25:25 PM »
I line, bit only with thid image ???
my english is very bad, please be patient. :)