Author Topic: laser module button use?  (Read 1372 times)

Hokuro

  • Jr. Member
  • **
  • Posts: 88
    • View Profile
laser module button use?
« on: February 09, 2020, 11:19:37 AM »
hi guys,
i bought a ttl laser module and mana se board.
on the laser there is a button that I thought operated the low power.
if I press it on the laser board the green LED lights up and I have no laser emission.
if I press it again on the laser board, blue LED lights up and I have laser emission.
it's normal?

ttl is fantastic, you can see the change of beam power changing little on the values (30 and 35 are different!)
also 2.5w ttl seems to me more powerful than 3w no ttl
my english is very bad, please be patient. :)

ggallant571

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3243
    • View Profile
Re: laser module button use?
« Reply #1 on: February 10, 2020, 04:16:22 AM »
Do you have a product specs? I recently looked at Eleksmaker diode modules and the 2.5W costs more than the 3.5W
SARCASM - Just one more service we offer here.

Hokuro

  • Jr. Member
  • **
  • Posts: 88
    • View Profile
my english is very bad, please be patient. :)

ggallant571

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3243
    • View Profile
Re: laser module button use?
« Reply #3 on: February 10, 2020, 12:50:26 PM »
Keep us posted. I reinstalled my older 2.5W in place of the newer 3.5W. Better at etching fine lines but it is definitely failing and needs to be replaced.
SARCASM - Just one more service we offer here.

Hokuro

  • Jr. Member
  • **
  • Posts: 88
    • View Profile
Re: laser module button use?
« Reply #4 on: February 10, 2020, 01:52:09 PM »
now I tried it flying.
I have to mount it in the shuttle and pass long wires in the chain
my english is very bad, please be patient. :)

Hokuro

  • Jr. Member
  • **
  • Posts: 88
    • View Profile
Re: laser module button use?
« Reply #5 on: February 21, 2020, 10:08:05 AM »
Hello guys,
I installed and wired the new laser. fantastic.
it's 2.5w but it looks much more powerful than the old 3w.
I can't do the grayscale but only dig deeper. (good for blind people, 3d image)
you can see the results of the power and speed test
https://photos.app.goo.gl/MfEnCwLTvxnFJ5RE6

the second photo is laserply untreated and it is almost acceptable, but on treated wood it doesn't work
any idea?
« Last Edit: February 21, 2020, 11:59:14 AM by Hokuro »
my english is very bad, please be patient. :)