Author Topic: Test  (Read 7127 times)

MassimilianoMarradi

  • Newbie
  • *
  • Posts: 33
    • View Profile
Test
« on: March 09, 2016, 07:36:58 AM »
Ciao.

This is something I did, I consider these just a test.
The Robots are on soft wood, I don't know what.
The fishes and the treehouse are on plywood, Gundam too.
The owl on cherry tree.

MassimilianoMarradi

  • Newbie
  • *
  • Posts: 33
    • View Profile
Re: Test
« Reply #1 on: March 09, 2016, 07:39:09 AM »
And...

MassimilianoMarradi

  • Newbie
  • *
  • Posts: 33
    • View Profile
Re: Test
« Reply #2 on: March 09, 2016, 07:41:26 AM »
And...

Zax

  • T2Laser
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 7302
    • View Profile
    • T2Laser
Re: Test
« Reply #3 on: March 09, 2016, 09:10:53 AM »
Were these done with Benbox?

Zax

  • T2Laser
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 7302
    • View Profile
    • T2Laser
Re: Test
« Reply #4 on: March 09, 2016, 09:16:53 AM »
All done with T2Laser software.

The wood box and squares are pine, the Cowboys logo is on a wood flooring sample and the million dollar bill is a thin piece of ply (it's actual size and has amazing detail).

- Zax.
« Last Edit: March 09, 2016, 09:19:56 AM by Zax »

Administrator

  • Administrator
  • Hero Member
  • *****
  • Posts: 2851
  • Administrator
    • View Profile
Re: Test
« Reply #5 on: March 09, 2016, 11:07:58 AM »
@Mass it would be interesting to see your same images done using @Zax's T2 software...
Admin -- Ralph -- support @ BenCutLaser dot us
https://www.dropbox.com/s/qv1qee2vb65785t/SetupBenCutLaser3.2a.zip?dl=0
BCL Paid license: $49.95
via Paypal to bclpp@primemail.com

MassimilianoMarradi

  • Newbie
  • *
  • Posts: 33
    • View Profile
Re: Test
« Reply #6 on: March 09, 2016, 01:58:00 PM »
Yes, I'll be happy to test.

caperry88

  • Full Member
  • ***
  • Posts: 192
    • View Profile
Re: Test
« Reply #7 on: March 16, 2016, 02:09:38 PM »
@Mass those are nice, using the MAC?
Equipment:  Gearbest 2500mw A5 Mini Laser Engraving Machine  -  2500MW  SILVER 167912906 Air-cooling Weak Light Automatic Positioning DIY Kit
Software: T2Laser with J-Tech Photonics 0.9g Grbl

MassimilianoMarradi

  • Newbie
  • *
  • Posts: 33
    • View Profile
Re: Test
« Reply #8 on: March 21, 2016, 01:48:34 AM »
Ciao.

Unfortunately, the software that you can use on Mac is not so good, as i've told you in the other post.
These are done with a Windows 7 VM on my Mac.

pianotech70

  • Newbie
  • *
  • Posts: 12
    • View Profile
    • Noble Piano Services
Re: Test
« Reply #9 on: March 25, 2016, 07:27:18 PM »
My first laser project of any success, done on olive wood with a Benbox DIY 300mw laser
You can tune a piano OR  a fish... if you know how to adjust the scales!!

caperry88

  • Full Member
  • ***
  • Posts: 192
    • View Profile
Re: Test
« Reply #10 on: March 26, 2016, 09:02:34 AM »
very nice
Equipment:  Gearbest 2500mw A5 Mini Laser Engraving Machine  -  2500MW  SILVER 167912906 Air-cooling Weak Light Automatic Positioning DIY Kit
Software: T2Laser with J-Tech Photonics 0.9g Grbl

MassimilianoMarradi

  • Newbie
  • *
  • Posts: 33
    • View Profile
Re: Test
« Reply #11 on: March 26, 2016, 09:10:57 AM »
My first laser project of any success.

Ciao.

Nice, but the space between the "pixel" and the line where there should be a point... I think you used a too fast setting. With high speed the laser moves fast, and the "engine break" is not enough to stop and made a single point, so it became a line.

If you change slightly the settings, slowing down, I'm sure you'll get a better one.

Let us know.

pianotech70

  • Newbie
  • *
  • Posts: 12
    • View Profile
    • Noble Piano Services
Re: Test
« Reply #12 on: March 26, 2016, 09:42:58 AM »
Will give that a shot. Still learning this software, and I am a slow learner!!1
You can tune a piano OR  a fish... if you know how to adjust the scales!!